Product Introduction Of CTO Activated Carbon Filter Machine
Activated carbon filter using activated carbon particles into the binder heated sintering. The inner layer of the filter is polypropylene skeleton to strengthen the compressive strength of the filter. The skeleton is covered with two layers of polypropylene microfiber felt, which can intercept the liquid through the carbon core and bring out more than 10 micron particles. The outer layer of the carbon core is coated with two layers of polypropylene microfiber felt, which can intercept the particles more than 10-20 microns in the liquid, so that the filter has dual functions of filtration and purification. The outermost layer is a white plastic net sleeve, so that the cartridge has a complete appearance and neat appearance. The two ends of the filter are provided with soft ding-eye rubber end caps, so that the filter cartridge has good sealing property. The finished product activated carbon filter is sealed tightly with plastic film to prevent the filter from being polluted and keep the filter constantly in fresh state.
Activated carbon filter has a good adsorption effect, can effectively remove the water residual chlorine, odor, color and organic matter.
Second Stage filtration: Granular activated carbon filter.